Package: ahcpd Version: 0.53-3 Depends: libc, ip, librt Source: feeds/routing/ahcpd SourceName: ahcpd License: MIT LicenseFiles: LICENCE Section: net Maintainer: Gabriel Kerneis Architecture: x86_64 Installed-Size: 22366 Filename: ahcpd_0.53-3_x86_64.ipk Size: 23251 SHA256sum: 86d3668fda1236dd00f60d72cfce6619741a872567b7d2bf02d2d7bd3283cba8 Description: Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. Package: alfred Version: 2020.0-1 Depends: libc, libnl-tiny, librt Source: feeds/routing/alfred SourceName: alfred License: GPL-2.0-only MIT LicenseFiles: LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT Section: net Maintainer: Simon Wunderlich Architecture: x86_64 Installed-Size: 26510 Filename: alfred_2020.0-1_x86_64.ipk Size: 27689 SHA256sum: 58d3d924cf99b6f1765f71d33f37f4e51f0a6e2843702c7c4099c6393654a829 Description: alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. Package: babel-pinger Version: 0.1-1 Depends: libc, librt Source: feeds/routing/babel-pinger SourceName: babel-pinger Section: net Maintainer: Gabriel Kerneis Architecture: x86_64 Installed-Size: 3768 Filename: babel-pinger_0.1-1_x86_64.ipk Size: 4570 SHA256sum: 188cf42971a3c2fe1b695082293e591feddcf0b023719312fa0e8394657a8715 Description: Babel-pinger is a hack to export a default route into Babel for people using DHCP to configure their routers rather than speaking to their upstream provider with a proper routing protocol. Package: babeld Version: 1.9.1-1 Depends: libc Source: feeds/routing/babeld SourceName: babeld License: MIT LicenseFiles: LICENCE Section: net Maintainer: Gabriel Kerneis , Baptiste Jonglez Architecture: x86_64 Installed-Size: 60916 Filename: babeld_1.9.1-1_x86_64.ipk Size: 62041 SHA256sum: 113903041dcac0de2dcc3fceadf194936ffd6c24a9212d91eec5200b24576712 Description: Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is in the process of becoming an IETF Standard. Package: batctl-default Version: 2020.0-1 Depends: libc, libnl-tiny, librt Provides: batctl Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default Source: feeds/routing/batctl SourceName: batctl-default License: GPL-2.0-only ISC MIT LicenseFiles: LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT LICENSES/deprecated/ISC Section: net Maintainer: Simon Wunderlich Architecture: x86_64 Installed-Size: 44543 Filename: batctl-default_2020.0-1_x86_64.ipk Size: 45561 SHA256sum: b417c6017406912c9380b7442cfe51cccef9a44e169d70a22950edbb79c6b7aa Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2020.0 of the user space utility. Standard subcommands for configuration and online debugging are enabled. Package: batctl-full Version: 2020.0-1 Depends: libc, libnl-tiny, librt Provides: batctl Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full Source: feeds/routing/batctl SourceName: batctl-full License: GPL-2.0-only ISC MIT LicenseFiles: LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT LICENSES/deprecated/ISC Section: net Maintainer: Simon Wunderlich Architecture: x86_64 Installed-Size: 51880 Filename: batctl-full_2020.0-1_x86_64.ipk Size: 52960 SHA256sum: f00a3821f1c5fbb5f15887dfe46ac433e92aaa14c92fc84609d4d7f5af743668 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2020.0 of the user space utility. Subcommands for configuration, online and offline debugging are enabled. Package: batctl-tiny Version: 2020.0-1 Depends: libc, libnl-tiny, librt Provides: batctl Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny Source: feeds/routing/batctl SourceName: batctl-tiny License: GPL-2.0-only ISC MIT LicenseFiles: LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT LICENSES/deprecated/ISC Section: net Maintainer: Simon Wunderlich Architecture: x86_64 Installed-Size: 16936 Filename: batctl-tiny_2020.0-1_x86_64.ipk Size: 17948 SHA256sum: 01d89c5663820501336a84447c2906f56066d138499e43860f953774c5c09828 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2020.0 of the user space utility. Only configuration relevant subcommands are enabled. Package: batmand Version: 1440-1 Depends: libc, libpthread, kmod-tun Source: feeds/routing/batmand SourceName: batmand License: GPL-2.0 Section: net Maintainer: Corinna "Elektra" Aichele Architecture: x86_64 Installed-Size: 44375 Filename: batmand_1440-1_x86_64.ipk Size: 45252 SHA256sum: 67ec41a82214eb776becfb6c2a430b5b6ca99ee83ec57830504cf808664fb71e Description: B.A.T.M.A.N. layer 3 routing daemon Package: bird1-ipv4-uci Version: 0.3-1 Depends: libc, bird1-ipv4, libuci20130104, uci Source: feeds/routing/bird1-openwrt/bird1-ipv4-openwrt SourceName: bird1-ipv4-uci License: GPL-3.0+ Section: net Maintainer: Eloi Carbo Architecture: x86_64 Installed-Size: 6739 Filename: bird1-ipv4-uci_0.3-1_x86_64.ipk Size: 7725 SHA256sum: 52892deda18457add0a182ea6c1249d3f1899c6d1eb8d4e987a0b4868927167b Description: bird1-ipv4 UCI integration module Package: bird1-ipv4 Version: 1.6.8-1 Depends: libc, libpthread Conflicts: bird4 Source: feeds/routing/bird1 SourceName: bird1-ipv4 License: GPL-2.0 Section: net Maintainer: Álvaro Fernández Rojas Architecture: x86_64 Installed-Size: 221361 Filename: bird1-ipv4_1.6.8-1_x86_64.ipk Size: 222675 SHA256sum: 6fbafe3df9add76489f6c593c8714ecaa3e540de0584c0f6e6db73bfaed11974 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP protocols. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. Package: bird1-ipv6-uci Version: 0.3-1 Depends: libc, bird1-ipv6, libuci20130104, uci Source: feeds/routing/bird1-openwrt/bird1-ipv6-openwrt SourceName: bird1-ipv6-uci License: GPL-3.0+ Section: net Maintainer: Eloi Carbo Architecture: x86_64 Installed-Size: 5900 Filename: bird1-ipv6-uci_0.3-1_x86_64.ipk Size: 6813 SHA256sum: d892c9e60c51fba368b524d17f10505cd50a6835a4c443e2ac9d1c882acd3611 Description: bird1-ipv6 UCI integration module Package: bird1-ipv6 Version: 1.6.8-1 Depends: libc, libpthread Conflicts: bird6 Source: feeds/routing/bird1 SourceName: bird1-ipv6 License: GPL-2.0 Section: net Maintainer: Álvaro Fernández Rojas Architecture: x86_64 Installed-Size: 248975 Filename: bird1-ipv6_1.6.8-1_x86_64.ipk Size: 250268 SHA256sum: 8d2536084669716aec6d208cdee8167541d521b8fe830194e88e614a2b11731f Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP protocols. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. Package: bird1c-ipv4 Version: 1.6.8-1 Depends: libc, libreadline8, libncurses6, bird1-ipv4 Conflicts: birdc4 Source: feeds/routing/bird1 SourceName: bird1c-ipv4 License: GPL-2.0 Section: net Maintainer: Álvaro Fernández Rojas Architecture: x86_64 Installed-Size: 9077 Filename: bird1c-ipv4_1.6.8-1_x86_64.ipk Size: 10308 SHA256sum: 10999e6f5bc87dac3d9282ed971cc59ef101c5d8bc61e3ee34d42e3fea4b8b4f Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird1c-ipv6 Version: 1.6.8-1 Depends: libc, libreadline8, libncurses6, bird1-ipv6 Conflicts: birdc6 Source: feeds/routing/bird1 SourceName: bird1c-ipv6 License: GPL-2.0 Section: net Maintainer: Álvaro Fernández Rojas Architecture: x86_64 Installed-Size: 9147 Filename: bird1c-ipv6_1.6.8-1_x86_64.ipk Size: 10377 SHA256sum: 68b14ab218de7b19d18254518dc44979d9699376358fe7abf588dc1d7fd01b0e Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird1cl-ipv4 Version: 1.6.8-1 Depends: libc, bird1-ipv4 Conflicts: birdcl4 Source: feeds/routing/bird1 SourceName: bird1cl-ipv4 License: GPL-2.0 Section: net Maintainer: Álvaro Fernández Rojas Architecture: x86_64 Installed-Size: 8401 Filename: bird1cl-ipv4_1.6.8-1_x86_64.ipk Size: 9565 SHA256sum: b25a512283cc9f160b68bf0d2505ab3e1f7eb83cd0fb76ef4fb0a6348dec60ae Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bird1cl-ipv6 Version: 1.6.8-1 Depends: libc, bird1-ipv6 Conflicts: birdcl6 Source: feeds/routing/bird1 SourceName: bird1cl-ipv6 License: GPL-2.0 Section: net Maintainer: Álvaro Fernández Rojas Architecture: x86_64 Installed-Size: 8463 Filename: bird1cl-ipv6_1.6.8-1_x86_64.ipk Size: 9629 SHA256sum: 160a7f69c7378e23bfe17b1dea6c00a89a3777bd814f23b0bd59d34217b2a16f Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bird2 Version: 2.0.7-2 Depends: libc, libpthread Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6 Source: feeds/routing/bird2 SourceName: bird2 License: GPL-2.0 Section: net Maintainer: Toke Høiland-Jørgensen Architecture: x86_64 Installed-Size: 324297 Filename: bird2_2.0.7-2_x86_64.ipk Size: 325384 SHA256sum: 2847cacc97caed6deccee27dd1d478ff4b09da4d9a8d181a4fb430f6eda51bb3 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. Package: bird2c Version: 2.0.7-2 Depends: libc, bird2, libreadline8, libncurses6 Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6 Source: feeds/routing/bird2 SourceName: bird2c License: GPL-2.0 Section: net Maintainer: Toke Høiland-Jørgensen Architecture: x86_64 Installed-Size: 9277 Filename: bird2c_2.0.7-2_x86_64.ipk Size: 10408 SHA256sum: a732d8a05d7ba8d87bb6a8638f2ba89d6ef3fd60c719f14a4d6d1437ebd62000 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird2cl Version: 2.0.7-2 Depends: libc, bird2 Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6 Source: feeds/routing/bird2 SourceName: bird2cl License: GPL-2.0 Section: net Maintainer: Toke Høiland-Jørgensen Architecture: x86_64 Installed-Size: 8387 Filename: bird2cl_2.0.7-2_x86_64.ipk Size: 9452 SHA256sum: 16f6bf1b44d58a068cbee7d32acd9d9bfdc374e3194822482fa75770fe72c30b Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bmx6-json Version: r2018020902-5 Depends: libc, bmx6, libjson-c4 Source: feeds/routing/bmx6 SourceName: bmx6-json License: GPL-2.0 Section: net Maintainer: Axel Neumann Architecture: x86_64 Installed-Size: 6503 Filename: bmx6-json_r2018020902-5_x86_64.ipk Size: 7224 SHA256sum: 0831863f2253802306ddb2f926b828b616fe41a7f173a9fd48e31a26c66fec88 Description: json plugin based on json-c Package: bmx6-sms Version: r2018020902-5 Depends: libc, bmx6 Source: feeds/routing/bmx6 SourceName: bmx6-sms License: GPL-2.0 Section: net Maintainer: Axel Neumann Architecture: x86_64 Installed-Size: 4868 Filename: bmx6-sms_r2018020902-5_x86_64.ipk Size: 5589 SHA256sum: 43116e9a123b4f7137c7b8d4e4b33d438f75e0d9b29387e6c741154d6ff23bbc Description: sms plugin Package: bmx6-table Version: r2018020902-5 Depends: libc, bmx6 Source: feeds/routing/bmx6 SourceName: bmx6-table License: GPL-2.0 Section: net Maintainer: Axel Neumann Architecture: x86_64 Installed-Size: 8450 Filename: bmx6-table_r2018020902-5_x86_64.ipk Size: 9224 SHA256sum: 6012009ff57d36fc665a63f88e1bad789238431cf9ef5fd3543fa3b083d68c36 Description: bmx6 table plugin to automatic announce routing-table routes via ip6ip tunnels Package: bmx6-uci-config Version: r2018020902-5 Depends: libc, bmx6, libuci20130104 Source: feeds/routing/bmx6 SourceName: bmx6-uci-config License: GPL-2.0 Section: net Maintainer: Axel Neumann Architecture: x86_64 Installed-Size: 8902 Filename: bmx6-uci-config_r2018020902-5_x86_64.ipk Size: 9731 SHA256sum: bb10eab7982f7a21c74803a43c613156f799773c903c79053832f564511d710c Description: configuration plugin based on uci (recommended!) Package: bmx6 Version: r2018020902-5 Depends: libc, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun Source: feeds/routing/bmx6 SourceName: bmx6 License: GPL-2.0 Section: net Maintainer: Axel Neumann Architecture: x86_64 Installed-Size: 135698 Filename: bmx6_r2018020902-5_x86_64.ipk Size: 136554 SHA256sum: 23168ccd481957fb141ec878328718040dc35be4eb5fb07bd230eda2f72aead8 Description: BMX6 layer 3 routing daemon supporting IPv4, IPv6, and IPv4 over IPv6 Package: bmx7-iwinfo Version: 7.1.1-2 Depends: libc, bmx7, libiwinfo20200105 Source: feeds/routing/bmx7 SourceName: bmx7-iwinfo License: GPL-2.0-or-later LicenseFiles: LICENSE Section: net Maintainer: Axel Neumann Architecture: x86_64 Installed-Size: 4014 Filename: bmx7-iwinfo_7.1.1-2_x86_64.ipk Size: 4790 SHA256sum: 3ff0efe50d2cc38341472f29dc9e8b48cdcb596916c004be37d92ba2e311e89b Description: link characteristics plugin via libiwinfo (recommended!) Package: bmx7-json Version: 7.1.1-2 Depends: libc, bmx7, libjson-c4 Source: feeds/routing/bmx7 SourceName: bmx7-json License: GPL-2.0-or-later LicenseFiles: LICENSE Section: net Maintainer: Axel Neumann Architecture: x86_64 Installed-Size: 7740 Filename: bmx7-json_7.1.1-2_x86_64.ipk Size: 8507 SHA256sum: 1fa65bccfd4685451552daaa68c6298acb1dfb669b8b3b2f148d927766d9a056 Description: json plugin based on json-c Package: bmx7-sms Version: 7.1.1-2 Depends: libc, bmx7 Source: feeds/routing/bmx7 SourceName: bmx7-sms License: GPL-2.0-or-later LicenseFiles: LICENSE Section: net Maintainer: Axel Neumann Architecture: x86_64 Installed-Size: 5324 Filename: bmx7-sms_7.1.1-2_x86_64.ipk Size: 6052 SHA256sum: 344248a33aa0396baa1f62bed2417f6528199063f2c65bc86cc3fd1c21e7a274 Description: sms plugin Package: bmx7-table Version: 7.1.1-2 Depends: libc, bmx7, bmx7-tun Source: feeds/routing/bmx7 SourceName: bmx7-table License: GPL-2.0-or-later LicenseFiles: LICENSE Section: net Maintainer: Axel Neumann Architecture: x86_64 Installed-Size: 9480 Filename: bmx7-table_7.1.1-2_x86_64.ipk Size: 10262 SHA256sum: ae1abdd4b5a64442bf4e5d9b1b8490a672fa53febd1a53044407c88b7faf9fa8 Description: plugin to announce routes from tables via tunnels Package: bmx7-topology Version: 7.1.1-2 Depends: libc, bmx7 Source: feeds/routing/bmx7 SourceName: bmx7-topology License: GPL-2.0-or-later LicenseFiles: LICENSE Section: net Maintainer: Axel Neumann Architecture: x86_64 Installed-Size: 4762 Filename: bmx7-topology_7.1.1-2_x86_64.ipk Size: 5502 SHA256sum: 981e15ed832b845a36922fa7a9c943532a2b3d8c31a46706a9fa8b3fc5718f97 Description: topology plugin Package: bmx7-tun Version: 7.1.1-2 Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun Source: feeds/routing/bmx7 SourceName: bmx7-tun License: GPL-2.0-or-later LicenseFiles: LICENSE Section: net Maintainer: Axel Neumann Architecture: x86_64 Installed-Size: 25888 Filename: bmx7-tun_7.1.1-2_x86_64.ipk Size: 26620 SHA256sum: 3712182b19797efe91baad6b8e8aa94a547d77a5d9d3f1962081b8456531cde7 Description: ipip-based tunnel plugin (recommended!) Package: bmx7-uci-config Version: 7.1.1-2 Depends: libc, bmx7, libuci20130104 Source: feeds/routing/bmx7 SourceName: bmx7-uci-config License: GPL-2.0-or-later LicenseFiles: LICENSE Section: net Maintainer: Axel Neumann Architecture: x86_64 Installed-Size: 8653 Filename: bmx7-uci-config_7.1.1-2_x86_64.ipk Size: 9463 SHA256sum: 3708149093caa63ba743e9f9c9e456d89d0b8f0145f01a703ba37a4ed99eed21 Description: configuration plugin based on uci (recommended!) Package: bmx7 Version: 7.1.1-2 Depends: libc, zlib, libmbedtls12, libiwinfo20200105 Source: feeds/routing/bmx7 SourceName: bmx7 License: GPL-2.0-or-later LicenseFiles: LICENSE Section: net Maintainer: Axel Neumann Architecture: x86_64 Installed-Size: 170162 Filename: bmx7_7.1.1-2_x86_64.ipk Size: 171054 SHA256sum: 44667eb2dbfb21be4daea112f4fad16ad9680b35858f58f030b1c6f2962a9db6 Description: BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing Package: cjdns-tests Version: v20.4-3 Depends: libc, libpthread, librt Source: feeds/routing/cjdns SourceName: cjdns-tests License: GPL-3.0-or-later LicenseFiles: LICENSE Section: net Maintainer: William Fleurant Architecture: x86_64 Installed-Size: 317335 Filename: cjdns-tests_v20.4-3_x86_64.ipk Size: 317935 SHA256sum: f27d8e8988f0591d08e96aa85af1541099f3e7fba43b4f649008cbf989de47c4 Description: cjdns test cases Package: cjdns Version: v20.4-3 Depends: libc, kmod-tun, libnl-tiny, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 Source: feeds/routing/cjdns SourceName: cjdns License: GPL-3.0-or-later LicenseFiles: LICENSE Section: net Maintainer: William Fleurant Architecture: x86_64 Installed-Size: 371746 Filename: cjdns_v20.4-3_x86_64.ipk Size: 372809 SHA256sum: 7b0a6402aff89333a0f177fa755cdd871cf45044e043546a4964edcf0566e5d3 Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: mcproxy Version: 2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2 Depends: libc, libpthread, libstdcpp6 Source: feeds/routing/mcproxy SourceName: mcproxy License: GPL-2.0+ Section: net Maintainer: Steven Barth Architecture: x86_64 Installed-Size: 129413 Filename: mcproxy_2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2_x86_64.ipk Size: 130494 SHA256sum: 0f550c5eb0de17f8e4c1b88a76215b6e940f6bc2b4a33239d365900dcce84339 Description: mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems. It operates on the kernel tables for multicast routing and allows for multiple instantiations, as well as dynamically changing downstream interfaces. Package: minimalist-pcproxy Version: 2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1 Depends: libc, libubox20191228 Source: feeds/routing/minimalist-pcproxy SourceName: minimalist-pcproxy License: GPL-2.0 Section: net Maintainer: Markus Stenberg Architecture: x86_64 Installed-Size: 6315 Filename: minimalist-pcproxy_2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1_x86_64.ipk Size: 7376 SHA256sum: d4bfd69b41b951a8350f4daae1f5c661fba88a7e4b21329e922f18bf985d59fa Description: This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. Package: mrd6 Version: 2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2 Depends: libc, libstdcpp6 Source: feeds/routing/mrd6 SourceName: mrd6 License: GPL-2.0+ Section: net Maintainer: Steven Barth Architecture: x86_64 Installed-Size: 297623 Filename: mrd6_2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2_x86_64.ipk Size: 297786 SHA256sum: c50ade5c961d83bffc8fd5dca212a56a25c514e7d743dee2f3d9708923473b42 Description: Multicast is becoming a major component in next generation networks, used in several scenarios, from video broadcasting to multimedia conferencing. In order to be implemented, new technology needs supporting hardware and software across a set of devices and systems. MRD6 is an implementation of a modular IPv6 Multicast Routing Framework for the Linux operating system and provides MLDv2 (as well as MLDv1), PIM-SM and MBGP support. Package: ndppd Version: 0.2.5-1 Depends: libc, uclibcxx Source: feeds/routing/ndppd SourceName: ndppd License: GPL-3.0+ Section: net Maintainer: Gabriel Kerneis Architecture: x86_64 Installed-Size: 34343 Filename: ndppd_0.2.5-1_x86_64.ipk Size: 35454 SHA256sum: ee768be61c97772b1fb98a2803ee5fe51bcbddbfc505c9c3ca646f74db2c060b Description: ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. Package: nodogsplash Version: 4.4.0-1 Depends: libc, libpthread, iptables-mod-ipopt, libmicrohttpd-no-ssl Conflicts: nodogsplash2 Source: feeds/routing/nodogsplash SourceName: nodogsplash License: GPL-2.0+ Section: net Maintainer: Moritz Warning Architecture: x86_64 Installed-Size: 64539 Filename: nodogsplash_4.4.0-1_x86_64.ipk Size: 65576 SHA256sum: a9eaea3b4029ee996f89be8fcdb2b832bc9516bf2674fcb974f4164a51308919 Description: Nodogsplash is a Captive Portal that offers a simple way to provide restricted access to the Internet by showing a splash page to the user before Internet access is granted. It also incorporates an API that allows the creation of sophisticated authentication applications. Package: ohybridproxy Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1 Depends: libc, libubox20191228, mdnsd Source: feeds/routing/ohybridproxy SourceName: ohybridproxy License: GPL-2.0 Section: net Maintainer: Steven Barth Architecture: x86_64 Installed-Size: 12265 Filename: ohybridproxy_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_x86_64.ipk Size: 13091 SHA256sum: 2465abd7f99db22c1970ef434d1c253c98f306199ffc62ae732566fbbd5a09f7 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. Package: oonf-dlep-proxy Version: 0.14.1-1 Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts Source: feeds/routing/oonf-dlep-proxy SourceName: oonf-dlep-proxy Section: net Maintainer: Henning Rogge Architecture: x86_64 Installed-Size: 119613 Filename: oonf-dlep-proxy_0.14.1-1_x86_64.ipk Size: 120497 SHA256sum: 8a9971b141462314072a1a8f5670381eaba43ab3c610cca69eb974ad27967764 Description: Build DLEP Radio+Router Agent Package: oonf-dlep-radio Version: 0.14.1-1 Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts Source: feeds/routing/oonf-dlep-radio SourceName: oonf-dlep-radio Section: net Maintainer: Henning Rogge Architecture: x86_64 Installed-Size: 115640 Filename: oonf-dlep-radio_0.14.1-1_x86_64.ipk Size: 116533 SHA256sum: 011a5ee90c0bbe1a53055f81f1272b32faacdf933c84ce3132b5c6ddc59a5b46 Description: Build DLEP Radio Agent Package: oonf-init-scripts Version: 0.9.1-r3 Depends: libc Source: feeds/routing/oonf-init-scripts SourceName: oonf-init-scripts Section: net Maintainer: Henning Rogge Architecture: x86_64 Installed-Size: 1390 Filename: oonf-init-scripts_0.9.1-r3_x86_64.ipk Size: 2114 SHA256sum: 1c27624b9f9b73c8a7d7b11a855f4d0aebdd2ca07c8dc430291d106dc0faad99 Description: Common OONF startup scripts Package: oonf-olsrd2 Version: 0.14.1-1 Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts Source: feeds/routing/oonf-olsrd2 SourceName: oonf-olsrd2 Section: net Maintainer: Henning Rogge Architecture: x86_64 Installed-Size: 189491 Filename: oonf-olsrd2_0.14.1-1_x86_64.ipk Size: 190335 SHA256sum: 8ea504e42cdd8c8debd619abcbfca9ab54cbc30691fb690f7d2a0ae7cf32019a Description: Build Olsrd V2 Routing Agent Package: pimbd Version: 2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1 Depends: libc, netifd Source: feeds/routing/pimbd SourceName: pimbd License: Apache-2.0 Section: net Maintainer: Pierre Pfister Architecture: x86_64 Installed-Size: 87544 Filename: pimbd_2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1_x86_64.ipk Size: 88484 SHA256sum: 93825042700e3a9fb753e5ca2dbafc401fdff72b07a19e35be0bf959c4f1c06e Description: This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. Package: prince Version: v0.4-1 Depends: libc, libjson-c4, libpthread Source: feeds/routing/prince SourceName: prince License: MIT Section: net Architecture: x86_64 Installed-Size: 30159 Filename: prince_v0.4-1_x86_64.ipk Size: 31090 SHA256sum: 047551534eaedd70501af337a3e1f7d1ddae55916ceb0dd3c9401bd9ecc17e20 Description: Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. Package: quagga-bgpd Version: 1.1.0-1 Depends: libc, quagga, quagga-libzebra Source: feeds/routing/quagga SourceName: quagga-bgpd License: GPL-2.0 Section: net Maintainer: Vasilis Tsiligiannis Architecture: x86_64 Installed-Size: 219159 Filename: quagga-bgpd_1.1.0-1_x86_64.ipk Size: 218516 SHA256sum: 7c79d49ce8e9c90074a48bd476d04fab4a541902634e0de94f348998a9608a40 Description: BGPv4, BGPv4+, BGPv4- routing engine Package: quagga-isisd Version: 1.1.0-1 Depends: libc, quagga, quagga-libzebra Source: feeds/routing/quagga SourceName: quagga-isisd License: GPL-2.0 Section: net Maintainer: Vasilis Tsiligiannis Architecture: x86_64 Installed-Size: 98830 Filename: quagga-isisd_1.1.0-1_x86_64.ipk Size: 99619 SHA256sum: 019be9d2ae5790dd5bd2ae9e471baffa6f9b2ae46458b02e98f4adcf790f12e2 Description: IS-IS routing engine Package: quagga-libospf Version: 1.1.0-1 Depends: libc, quagga, quagga-libzebra Source: feeds/routing/quagga SourceName: quagga-libospf License: GPL-2.0 Section: net Maintainer: Vasilis Tsiligiannis Architecture: x86_64 Installed-Size: 201836 Filename: quagga-libospf_1.1.0-1_x86_64.ipk Size: 201404 SHA256sum: ea42b8b70b020f3a24c595427f212a3f068f4b45b69719853dd66d2daa89da0f Description: OSPF library Package: quagga-libzebra Version: 1.1.0-1 Depends: libc, quagga Source: feeds/routing/quagga SourceName: quagga-libzebra License: GPL-2.0 Section: net Maintainer: Vasilis Tsiligiannis Architecture: x86_64 Installed-Size: 143040 Filename: quagga-libzebra_1.1.0-1_x86_64.ipk Size: 142925 SHA256sum: da2f57de4504e31586b61c9934cbe6e8c7d4082830bb623a97475c06b72bcf3c Description: zebra library Package: quagga-ospf6d Version: 1.1.0-1 Depends: libc, quagga, quagga-libospf Source: feeds/routing/quagga SourceName: quagga-ospf6d License: GPL-2.0 Section: net Maintainer: Vasilis Tsiligiannis Architecture: x86_64 Installed-Size: 93867 Filename: quagga-ospf6d_1.1.0-1_x86_64.ipk Size: 94732 SHA256sum: 3ae324c6e36e1d831326342cc713ebbf6077aa979ace532f5038538202f0c155 Description: OSPFv3 routing engine Package: quagga-ospfd Version: 1.1.0-1 Depends: libc, quagga, quagga-libospf Source: feeds/routing/quagga SourceName: quagga-ospfd License: GPL-2.0 Section: net Maintainer: Vasilis Tsiligiannis Architecture: x86_64 Installed-Size: 3585 Filename: quagga-ospfd_1.1.0-1_x86_64.ipk Size: 4314 SHA256sum: f9afe2d8c5846f1e0aaefd153d50c7d87454921e95c5b17d7bb8553022b10fa2 Description: OSPFv2 routing engine Package: quagga-ripd Version: 1.1.0-1 Depends: libc, quagga, quagga-libzebra Source: feeds/routing/quagga SourceName: quagga-ripd License: GPL-2.0 Section: net Maintainer: Vasilis Tsiligiannis Architecture: x86_64 Installed-Size: 38852 Filename: quagga-ripd_1.1.0-1_x86_64.ipk Size: 39701 SHA256sum: 8e8c5d3ea8f225325ab017aec399253efc18fd637d3eea01034c198db2e08485 Description: RIP routing engine Package: quagga-ripngd Version: 1.1.0-1 Depends: libc, quagga, quagga-libzebra Source: feeds/routing/quagga SourceName: quagga-ripngd License: GPL-2.0 Section: net Maintainer: Vasilis Tsiligiannis Architecture: x86_64 Installed-Size: 31444 Filename: quagga-ripngd_1.1.0-1_x86_64.ipk Size: 32216 SHA256sum: 0171067f61b9b137666c086e7d8741dfe53f7b68ec038f6a9ff47fa79bf45b4d Description: RIPNG routing engine Package: quagga-vtysh Version: 1.1.0-1 Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6 Source: feeds/routing/quagga SourceName: quagga-vtysh License: GPL-2.0 Section: net Maintainer: Vasilis Tsiligiannis Architecture: x86_64 Installed-Size: 117295 Filename: quagga-vtysh_1.1.0-1_x86_64.ipk Size: 116619 SHA256sum: d15c3fee7c0f516ec18525dbcbbb74225f9ae7b1119cfdfe8f0d2ba69f425125 Description: integrated shell for Quagga routing software Package: quagga-watchquagga Version: 1.1.0-1 Depends: libc, quagga, quagga-libzebra Source: feeds/routing/quagga SourceName: quagga-watchquagga License: GPL-2.0 Section: net Maintainer: Vasilis Tsiligiannis Architecture: x86_64 Installed-Size: 11693 Filename: quagga-watchquagga_1.1.0-1_x86_64.ipk Size: 12431 SHA256sum: 2740efe02857115853eb5173af3f62373edaf790a8b790c7a5659de082586f57 Description: Quagga watchdog Package: quagga-zebra Version: 1.1.0-1 Depends: libc, quagga, quagga-libzebra Source: feeds/routing/quagga SourceName: quagga-zebra License: GPL-2.0 Section: net Maintainer: Vasilis Tsiligiannis Architecture: x86_64 Installed-Size: 95788 Filename: quagga-zebra_1.1.0-1_x86_64.ipk Size: 96525 SHA256sum: ce6e51cba48f1a45d05f973e42a696e0e16f90012382502fb682cdc7a8b7780c Description: Zebra daemon Package: quagga Version: 1.1.0-1 Depends: libc, librt Source: feeds/routing/quagga SourceName: quagga License: GPL-2.0 Section: net Maintainer: Vasilis Tsiligiannis Architecture: x86_64 Installed-Size: 2387 Filename: quagga_1.1.0-1_x86_64.ipk Size: 3193 SHA256sum: cac99358dd68d5b6a8fba04c39405a261536f05f069d259eb9e540cd56d1c8c8 Description: A routing software package that provides TCP/IP based routing services with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2, OSPFv3, BGP-4, and BGP-4+ Package: vis Version: 1440-2 Depends: libc, libpthread Source: feeds/routing/vis SourceName: vis License: GPL-2.0 Section: net Maintainer: Corinna "Elektra" Aichele Architecture: x86_64 Installed-Size: 11582 Filename: vis_1440-2_x86_64.ipk Size: 12365 SHA256sum: 9f03aa979dec30a4de6bea3f430a44091153a4d934916483c9d27c779962c821 Description: visualization server for B.A.T.M.A.N. layer 3 Package: zonestitcher Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1 Depends: libc, libubox20191228 Source: feeds/routing/ohybridproxy SourceName: zonestitcher License: GPL-2.0 Section: net Maintainer: Steven Barth Architecture: x86_64 Installed-Size: 10276 Filename: zonestitcher_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_x86_64.ipk Size: 11091 SHA256sum: 505cfa4c5f4a699b7979be2a89167c5c86f1a8547d35cba938e3639f5c0a52ed Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again.