Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: x86_64
Installed-Size: 22366
Filename: ahcpd_0.53-3_x86_64.ipk
Size: 23251
SHA256sum: 86d3668fda1236dd00f60d72cfce6619741a872567b7d2bf02d2d7bd3283cba8
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2020.0-1
Depends: libc, libnl-tiny, librt
License: GPL-2.0-only MIT
Section: net
Architecture: x86_64
Installed-Size: 26510
Filename: alfred_2020.0-1_x86_64.ipk
Size: 27689
SHA256sum: 58d3d924cf99b6f1765f71d33f37f4e51f0a6e2843702c7c4099c6393654a829
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: x86_64
Installed-Size: 3768
Filename: babel-pinger_0.1-1_x86_64.ipk
Size: 4570
SHA256sum: 188cf42971a3c2fe1b695082293e591feddcf0b023719312fa0e8394657a8715
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.9.1-1
Depends: libc
License: MIT
Section: net
Architecture: x86_64
Installed-Size: 60916
Filename: babeld_1.9.1-1_x86_64.ipk
Size: 62041
SHA256sum: 113903041dcac0de2dcc3fceadf194936ffd6c24a9212d91eec5200b24576712
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is in the process of becoming an IETF Standard.

Package: batctl-default
Version: 2020.0-1
Depends: libc, libnl-tiny, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: x86_64
Installed-Size: 44543
Filename: batctl-default_2020.0-1_x86_64.ipk
Size: 45561
SHA256sum: b417c6017406912c9380b7442cfe51cccef9a44e169d70a22950edbb79c6b7aa
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2020.0 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2020.0-1
Depends: libc, libnl-tiny, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: x86_64
Installed-Size: 51880
Filename: batctl-full_2020.0-1_x86_64.ipk
Size: 52960
SHA256sum: f00a3821f1c5fbb5f15887dfe46ac433e92aaa14c92fc84609d4d7f5af743668
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2020.0 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2020.0-1
Depends: libc, libnl-tiny, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: x86_64
Installed-Size: 16936
Filename: batctl-tiny_2020.0-1_x86_64.ipk
Size: 17948
SHA256sum: 01d89c5663820501336a84447c2906f56066d138499e43860f953774c5c09828
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2020.0 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 44375
Filename: batmand_1440-1_x86_64.ipk
Size: 45252
SHA256sum: 67ec41a82214eb776becfb6c2a430b5b6ca99ee83ec57830504cf808664fb71e
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird1-ipv4-uci
Version: 0.3-1
Depends: libc, bird1-ipv4, libuci20130104, uci
License: GPL-3.0+
Section: net
Architecture: x86_64
Installed-Size: 6739
Filename: bird1-ipv4-uci_0.3-1_x86_64.ipk
Size: 7725
SHA256sum: 52892deda18457add0a182ea6c1249d3f1899c6d1eb8d4e987a0b4868927167b
Description:  bird1-ipv4 UCI integration module

Package: bird1-ipv4
Version: 1.6.8-1
Depends: libc, libpthread
Conflicts: bird4
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 221361
Filename: bird1-ipv4_1.6.8-1_x86_64.ipk
Size: 222675
SHA256sum: 6fbafe3df9add76489f6c593c8714ecaa3e540de0584c0f6e6db73bfaed11974
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1-ipv6-uci
Version: 0.3-1
Depends: libc, bird1-ipv6, libuci20130104, uci
License: GPL-3.0+
Section: net
Architecture: x86_64
Installed-Size: 5900
Filename: bird1-ipv6-uci_0.3-1_x86_64.ipk
Size: 6813
SHA256sum: d892c9e60c51fba368b524d17f10505cd50a6835a4c443e2ac9d1c882acd3611
Description:  bird1-ipv6 UCI integration module

Package: bird1-ipv6
Version: 1.6.8-1
Depends: libc, libpthread
Conflicts: bird6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 248975
Filename: bird1-ipv6_1.6.8-1_x86_64.ipk
Size: 250268
SHA256sum: 8d2536084669716aec6d208cdee8167541d521b8fe830194e88e614a2b11731f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1c-ipv4
Version: 1.6.8-1
Depends: libc, libreadline8, libncurses6, bird1-ipv4
Conflicts: birdc4
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 9077
Filename: bird1c-ipv4_1.6.8-1_x86_64.ipk
Size: 10308
SHA256sum: 10999e6f5bc87dac3d9282ed971cc59ef101c5d8bc61e3ee34d42e3fea4b8b4f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1c-ipv6
Version: 1.6.8-1
Depends: libc, libreadline8, libncurses6, bird1-ipv6
Conflicts: birdc6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 9147
Filename: bird1c-ipv6_1.6.8-1_x86_64.ipk
Size: 10377
SHA256sum: 68b14ab218de7b19d18254518dc44979d9699376358fe7abf588dc1d7fd01b0e
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1cl-ipv4
Version: 1.6.8-1
Depends: libc, bird1-ipv4
Conflicts: birdcl4
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 8401
Filename: bird1cl-ipv4_1.6.8-1_x86_64.ipk
Size: 9565
SHA256sum: b25a512283cc9f160b68bf0d2505ab3e1f7eb83cd0fb76ef4fb0a6348dec60ae
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird1cl-ipv6
Version: 1.6.8-1
Depends: libc, bird1-ipv6
Conflicts: birdcl6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 8463
Filename: bird1cl-ipv6_1.6.8-1_x86_64.ipk
Size: 9629
SHA256sum: 160a7f69c7378e23bfe17b1dea6c00a89a3777bd814f23b0bd59d34217b2a16f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird2
Version: 2.0.7-2
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 324297
Filename: bird2_2.0.7-2_x86_64.ipk
Size: 325384
SHA256sum: 2847cacc97caed6deccee27dd1d478ff4b09da4d9a8d181a4fb430f6eda51bb3
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.0.7-2
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 9277
Filename: bird2c_2.0.7-2_x86_64.ipk
Size: 10408
SHA256sum: a732d8a05d7ba8d87bb6a8638f2ba89d6ef3fd60c719f14a4d6d1437ebd62000
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.0.7-2
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 8387
Filename: bird2cl_2.0.7-2_x86_64.ipk
Size: 9452
SHA256sum: 16f6bf1b44d58a068cbee7d32acd9d9bfdc374e3194822482fa75770fe72c30b
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx6-json
Version: r2018020902-5
Depends: libc, bmx6, libjson-c4
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 6503
Filename: bmx6-json_r2018020902-5_x86_64.ipk
Size: 7224
SHA256sum: 0831863f2253802306ddb2f926b828b616fe41a7f173a9fd48e31a26c66fec88
Description:  json plugin based on json-c

Package: bmx6-sms
Version: r2018020902-5
Depends: libc, bmx6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 4868
Filename: bmx6-sms_r2018020902-5_x86_64.ipk
Size: 5589
SHA256sum: 43116e9a123b4f7137c7b8d4e4b33d438f75e0d9b29387e6c741154d6ff23bbc
Description:  sms plugin

Package: bmx6-table
Version: r2018020902-5
Depends: libc, bmx6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 8450
Filename: bmx6-table_r2018020902-5_x86_64.ipk
Size: 9224
SHA256sum: 6012009ff57d36fc665a63f88e1bad789238431cf9ef5fd3543fa3b083d68c36
Description:  bmx6 table plugin to automatic announce routing-table routes via ip6ip tunnels

Package: bmx6-uci-config
Version: r2018020902-5
Depends: libc, bmx6, libuci20130104
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 8902
Filename: bmx6-uci-config_r2018020902-5_x86_64.ipk
Size: 9731
SHA256sum: bb10eab7982f7a21c74803a43c613156f799773c903c79053832f564511d710c
Description:  configuration plugin based on uci (recommended!)

Package: bmx6
Version: r2018020902-5
Depends: libc, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 135698
Filename: bmx6_r2018020902-5_x86_64.ipk
Size: 136554
SHA256sum: 23168ccd481957fb141ec878328718040dc35be4eb5fb07bd230eda2f72aead8
Description:  BMX6 layer 3 routing daemon supporting IPv4, IPv6, and IPv4 over IPv6

Package: bmx7-iwinfo
Version: 7.1.1-2
Depends: libc, bmx7, libiwinfo20200105
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 4014
Filename: bmx7-iwinfo_7.1.1-2_x86_64.ipk
Size: 4790
SHA256sum: 3ff0efe50d2cc38341472f29dc9e8b48cdcb596916c004be37d92ba2e311e89b
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-2
Depends: libc, bmx7, libjson-c4
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 7740
Filename: bmx7-json_7.1.1-2_x86_64.ipk
Size: 8507
SHA256sum: 1fa65bccfd4685451552daaa68c6298acb1dfb669b8b3b2f148d927766d9a056
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-2
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 5324
Filename: bmx7-sms_7.1.1-2_x86_64.ipk
Size: 6052
SHA256sum: 344248a33aa0396baa1f62bed2417f6528199063f2c65bc86cc3fd1c21e7a274
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-2
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 9480
Filename: bmx7-table_7.1.1-2_x86_64.ipk
Size: 10262
SHA256sum: ae1abdd4b5a64442bf4e5d9b1b8490a672fa53febd1a53044407c88b7faf9fa8
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-2
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 4762
Filename: bmx7-topology_7.1.1-2_x86_64.ipk
Size: 5502
SHA256sum: 981e15ed832b845a36922fa7a9c943532a2b3d8c31a46706a9fa8b3fc5718f97
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-2
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 25888
Filename: bmx7-tun_7.1.1-2_x86_64.ipk
Size: 26620
SHA256sum: 3712182b19797efe91baad6b8e8aa94a547d77a5d9d3f1962081b8456531cde7
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-2
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 8653
Filename: bmx7-uci-config_7.1.1-2_x86_64.ipk
Size: 9463
SHA256sum: 3708149093caa63ba743e9f9c9e456d89d0b8f0145f01a703ba37a4ed99eed21
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-2
Depends: libc, zlib, libmbedtls12, libiwinfo20200105
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 170162
Filename: bmx7_7.1.1-2_x86_64.ipk
Size: 171054
SHA256sum: 44667eb2dbfb21be4daea112f4fad16ad9680b35858f58f030b1c6f2962a9db6
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v20.4-3
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 317335
Filename: cjdns-tests_v20.4-3_x86_64.ipk
Size: 317935
SHA256sum: f27d8e8988f0591d08e96aa85af1541099f3e7fba43b4f649008cbf989de47c4
Description:  cjdns test cases

Package: cjdns
Version: v20.4-3
Depends: libc, kmod-tun, libnl-tiny, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 371746
Filename: cjdns_v20.4-3_x86_64.ipk
Size: 372809
SHA256sum: 7b0a6402aff89333a0f177fa755cdd871cf45044e043546a4964edcf0566e5d3
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: mcproxy
Version: 2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0+
Section: net
Architecture: x86_64
Installed-Size: 129413
Filename: mcproxy_2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2_x86_64.ipk
Size: 130494
SHA256sum: 0f550c5eb0de17f8e4c1b88a76215b6e940f6bc2b4a33239d365900dcce84339
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: minimalist-pcproxy
Version: 2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1
Depends: libc, libubox20191228
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 6315
Filename: minimalist-pcproxy_2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1_x86_64.ipk
Size: 7376
SHA256sum: d4bfd69b41b951a8350f4daae1f5c661fba88a7e4b21329e922f18bf985d59fa
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: mrd6
Version: 2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2
Depends: libc, libstdcpp6
License: GPL-2.0+
Section: net
Architecture: x86_64
Installed-Size: 297623
Filename: mrd6_2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2_x86_64.ipk
Size: 297786
SHA256sum: c50ade5c961d83bffc8fd5dca212a56a25c514e7d743dee2f3d9708923473b42
Description:  Multicast is becoming a major component in next generation networks, used 
 in several scenarios, from video broadcasting to multimedia conferencing. 
 In order to be implemented, new technology needs supporting hardware and 
 software across a set of devices and systems. MRD6 is an implementation of 
 a modular IPv6 Multicast Routing Framework for the Linux operating system 
 and provides MLDv2 (as well as MLDv1), PIM-SM and MBGP support.

Package: ndppd
Version: 0.2.5-1
Depends: libc, uclibcxx
License: GPL-3.0+
Section: net
Architecture: x86_64
Installed-Size: 34343
Filename: ndppd_0.2.5-1_x86_64.ipk
Size: 35454
SHA256sum: ee768be61c97772b1fb98a2803ee5fe51bcbddbfc505c9c3ca646f74db2c060b
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 4.4.0-1
Depends: libc, libpthread, iptables-mod-ipopt, libmicrohttpd-no-ssl
Conflicts: nodogsplash2
License: GPL-2.0+
Section: net
Architecture: x86_64
Installed-Size: 64539
Filename: nodogsplash_4.4.0-1_x86_64.ipk
Size: 65576
SHA256sum: a9eaea3b4029ee996f89be8fcdb2b832bc9516bf2674fcb974f4164a51308919
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.
 It also incorporates an API that allows the creation of
 sophisticated authentication applications.

Package: ohybridproxy
Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1
Depends: libc, libubox20191228, mdnsd
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 12265
Filename: ohybridproxy_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_x86_64.ipk
Size: 13091
SHA256sum: 2465abd7f99db22c1970ef434d1c253c98f306199ffc62ae732566fbbd5a09f7
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: oonf-dlep-proxy
Version: 0.14.1-1
Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts
Section: net
Architecture: x86_64
Installed-Size: 119613
Filename: oonf-dlep-proxy_0.14.1-1_x86_64.ipk
Size: 120497
SHA256sum: 8a9971b141462314072a1a8f5670381eaba43ab3c610cca69eb974ad27967764
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 0.14.1-1
Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts
Section: net
Architecture: x86_64
Installed-Size: 115640
Filename: oonf-dlep-radio_0.14.1-1_x86_64.ipk
Size: 116533
SHA256sum: 011a5ee90c0bbe1a53055f81f1272b32faacdf933c84ce3132b5c6ddc59a5b46
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: x86_64
Installed-Size: 1390
Filename: oonf-init-scripts_0.9.1-r3_x86_64.ipk
Size: 2114
SHA256sum: 1c27624b9f9b73c8a7d7b11a855f4d0aebdd2ca07c8dc430291d106dc0faad99
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 0.14.1-1
Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts
Section: net
Architecture: x86_64
Installed-Size: 189491
Filename: oonf-olsrd2_0.14.1-1_x86_64.ipk
Size: 190335
SHA256sum: 8ea504e42cdd8c8debd619abcbfca9ab54cbc30691fb690f7d2a0ae7cf32019a
Description:  Build Olsrd V2 Routing Agent

Package: pimbd
Version: 2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: x86_64
Installed-Size: 87544
Filename: pimbd_2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1_x86_64.ipk
Size: 88484
SHA256sum: 93825042700e3a9fb753e5ca2dbafc401fdff72b07a19e35be0bf959c4f1c06e
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be 
 installed and running in order for PIM to function.

Package: prince
Version: v0.4-1
Depends: libc, libjson-c4, libpthread
License: MIT
Section: net
Architecture: x86_64
Installed-Size: 30159
Filename: prince_v0.4-1_x86_64.ipk
Size: 31090
SHA256sum: 047551534eaedd70501af337a3e1f7d1ddae55916ceb0dd3c9401bd9ecc17e20
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: quagga-bgpd
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 219159
Filename: quagga-bgpd_1.1.0-1_x86_64.ipk
Size: 218516
SHA256sum: 7c79d49ce8e9c90074a48bd476d04fab4a541902634e0de94f348998a9608a40
Description:  BGPv4, BGPv4+, BGPv4- routing engine

Package: quagga-isisd
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 98830
Filename: quagga-isisd_1.1.0-1_x86_64.ipk
Size: 99619
SHA256sum: 019be9d2ae5790dd5bd2ae9e471baffa6f9b2ae46458b02e98f4adcf790f12e2
Description:  IS-IS routing engine

Package: quagga-libospf
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 201836
Filename: quagga-libospf_1.1.0-1_x86_64.ipk
Size: 201404
SHA256sum: ea42b8b70b020f3a24c595427f212a3f068f4b45b69719853dd66d2daa89da0f
Description:  OSPF library

Package: quagga-libzebra
Version: 1.1.0-1
Depends: libc, quagga
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 143040
Filename: quagga-libzebra_1.1.0-1_x86_64.ipk
Size: 142925
SHA256sum: da2f57de4504e31586b61c9934cbe6e8c7d4082830bb623a97475c06b72bcf3c
Description:  zebra library

Package: quagga-ospf6d
Version: 1.1.0-1
Depends: libc, quagga, quagga-libospf
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 93867
Filename: quagga-ospf6d_1.1.0-1_x86_64.ipk
Size: 94732
SHA256sum: 3ae324c6e36e1d831326342cc713ebbf6077aa979ace532f5038538202f0c155
Description:  OSPFv3 routing engine

Package: quagga-ospfd
Version: 1.1.0-1
Depends: libc, quagga, quagga-libospf
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 3585
Filename: quagga-ospfd_1.1.0-1_x86_64.ipk
Size: 4314
SHA256sum: f9afe2d8c5846f1e0aaefd153d50c7d87454921e95c5b17d7bb8553022b10fa2
Description:  OSPFv2 routing engine

Package: quagga-ripd
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 38852
Filename: quagga-ripd_1.1.0-1_x86_64.ipk
Size: 39701
SHA256sum: 8e8c5d3ea8f225325ab017aec399253efc18fd637d3eea01034c198db2e08485
Description:  RIP routing engine

Package: quagga-ripngd
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 31444
Filename: quagga-ripngd_1.1.0-1_x86_64.ipk
Size: 32216
SHA256sum: 0171067f61b9b137666c086e7d8741dfe53f7b68ec038f6a9ff47fa79bf45b4d
Description:  RIPNG routing engine

Package: quagga-vtysh
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 117295
Filename: quagga-vtysh_1.1.0-1_x86_64.ipk
Size: 116619
SHA256sum: d15c3fee7c0f516ec18525dbcbbb74225f9ae7b1119cfdfe8f0d2ba69f425125
Description:  integrated shell for Quagga routing software

Package: quagga-watchquagga
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 11693
Filename: quagga-watchquagga_1.1.0-1_x86_64.ipk
Size: 12431
SHA256sum: 2740efe02857115853eb5173af3f62373edaf790a8b790c7a5659de082586f57
Description:  Quagga watchdog

Package: quagga-zebra
Version: 1.1.0-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 95788
Filename: quagga-zebra_1.1.0-1_x86_64.ipk
Size: 96525
SHA256sum: ce6e51cba48f1a45d05f973e42a696e0e16f90012382502fb682cdc7a8b7780c
Description:  Zebra daemon

Package: quagga
Version: 1.1.0-1
Depends: libc, librt
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 2387
Filename: quagga_1.1.0-1_x86_64.ipk
Size: 3193
SHA256sum: cac99358dd68d5b6a8fba04c39405a261536f05f069d259eb9e540cd56d1c8c8
Description:  A routing software package that provides TCP/IP based routing services
 with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
 OSPFv3, BGP-4, and BGP-4+

Package: vis
Version: 1440-2
Depends: libc, libpthread
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 11582
Filename: vis_1440-2_x86_64.ipk
Size: 12365
SHA256sum: 9f03aa979dec30a4de6bea3f430a44091153a4d934916483c9d27c779962c821
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1
Depends: libc, libubox20191228
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 10276
Filename: zonestitcher_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_x86_64.ipk
Size: 11091
SHA256sum: 505cfa4c5f4a699b7979be2a89167c5c86f1a8547d35cba938e3639f5c0a52ed
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.